When printing on my Ender 3 Max Neo (stock except for a PEI bed), the right side of the bed is always printing too close. I manually leveled the bed, and then I run the auto-leveling sequence. I also have it set to run auto-level before every print, and confirmed that it's enabled using M420 S1 after the G29 in the opening...
Hey 3D printing fellas,...
This might be a useful reference to be aware of for projects, especially for very small designs....
Hi guys, it's The Clog Guy, thought I'd try to share something other than problems......
Ok guys, I'm breaking down and posting here to see if anyone has any ideas. I'm greatful for any advice....
Hi guys. Please check my previous post for any background questions, I don't have it in me to go over everything again....
Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday)....
As I'm graduating college in a few weeks, I'll be losing access to my university's free printers and filament. I'm going to build up a home lab with a couple printers where I can make goofy little mechanical projects as well as some components for my cars and stuff....
Youtube video...
Made a FreeCAD tutorial for making this container: https://makertube.net/w/mg7rdKStSUua7AhnAt1RoM I have to warn you that I made a bunch of mistakes and it may be really hard to follow.
This is a follow up from my spaghetti post a few days ago....
Printed out this little bathroom or whatever organizer. Gridfinity is neat. Choose your bins, glue to the base and viola....
You can download the files on:...
Source https://twitter.com/repkord/status/1788529858978717870...
STL https://www.printables.com/model/866603-carboy-dryer-stackable...
Today we're ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen....
I have recently obtained a friend's old Formlabs Form 2 SLA printer. I I am an absolute beginner to printing, but I am pretty excited to get into it....
My SUNLU S1 Plus filament dryer was slipping around getting yanked forward on my TUKKARI TLX MK4 enclosure, so I designed this mount which fits into the existing slots on top of the enclosure. Prints in two pieces that screw together since otherwise the supports would be complicated. Had to print the larger piece on my big bed...
Any suggestions before trying again after a reset? This is my first go round changing nozzle diameter. I went from a 0.4 mm nozzle to a 0.6 mm nozzle....
Our youngest broke his big brother's bumblebee. Three iterations later, everything fits pretty well and the older one is happy to have bumblebee back....
Hello all. I am very new to this but it is all very cool to me. I ran into a problem and I am not sure how to troubleshoot it. I downloaded a simple pull string helicopter off thingiverse. After running through the slicer software, the estimated build time is 131 hours. Relative to it’s size this seems insane. If I “run the...
cross-posted from: https://sh.itjust.works/post/18848847...
